To reset a Ring Doorbell, first choose the lightest reset that fits the problem: a soft restart, a full power cycle, or a factory reset. A soft restart is the mildest fix. A power cycle helps when the doorbell is stuck or unresponsive. A factory reset clears setup so you can pair it again. Before you start, check the exact model in the Ring app or on the device label, because the reset button location and hold time can differ.
Start here: which reset do you actually need?
Use the least disruptive reset that matches the problem. If the doorbell is lagging, missing notifications, or acting odd after a brief glitch, a soft restart or power cycle is usually the first move. If you need to set it up like a new device, or the app can’t recover the current pairing, you’re looking at a factory reset.
| Situation | Try this first | What it does |
|---|---|---|
| The app or device is slow, but the doorbell still responds | Soft restart | Reboots the doorbell without clearing setup |
| The doorbell seems stuck or unresponsive | Power cycle | Fully cuts power, then starts it again |
| You need a fresh setup or plan to hand the device off | Factory reset | Clears device setup so it can be paired again |
Battery and wired Ring Doorbells can fail in different ways. A battery model often needs the battery pack reseated or the reset button held while the device still has charge. A wired model may need power interrupted before the reset button will do anything at all.
If you only need a quick reboot, try the softer reset before you erase setup. A factory reset creates extra work later, because you’ll need to add the doorbell back in the app.
Check your Ring model before you touch anything
Confirm the exact model before you start. You can usually find it in the Ring app under the device’s settings, or on the device label and packaging if you still have them.
This matters because the reset button is not in the same place on every Ring Doorbell. On some models it’s behind the faceplate or under the battery compartment, and on others the reset behavior depends on how the unit is powered. If you press the wrong spot and nothing happens, the problem may be the model, not the reset itself.
Before you begin
Have the doorbell, the Ring app, and enough time for setup ready before you reset anything. If you clear the device from setup, you may need to reconnect it right away so you’re not left with a powered doorbell that isn’t linked to your account.
- Your phone with the app signed in
- Physical access to the doorbell
- A small tool if your model uses a security screw on the faceplate
- Enough time to finish setup if you do a factory reset
If the doorbell is mounted high or awkwardly, deal with that first. It’s much easier to work the reset button when you’re not balancing on a ladder and trying to hold a tiny button at the same time.
How to reset a battery-powered Ring Doorbell
For a battery-powered Ring Doorbell, start by removing the faceplate or battery pack, depending on the model, so you can reach the reset button. The button is usually small and easy to miss, and people often think they pressed it when they only touched the faceplate.
- Remove the faceplate or battery pack as your model requires.
- Find the reset button on the back or inside edge of the device.
- Press and hold the reset button.
- Keep holding until the doorbell restarts, shows a light change, or enters reset mode.
- Release the button and wait for the device to finish restarting.
For many Ring Doorbell battery models, holding the reset button for about 15 to 20 seconds is the usual pattern. Still, check your exact model’s current Ring support instructions before treating that as a rule. Watch for the device to visibly restart or change its light pattern, not just for the seconds to run out.
If the battery is nearly empty, charge it or reseat it first. A drained battery can make a reset look like it failed when the doorbell just doesn’t have enough power to react.
How to reset a wired Ring Doorbell
A wired Ring Doorbell may need a power interruption before the reset button responds. If the unit is still powered, the button can seem dead, so cut power first if your model and installation allow it.
- Turn off power to the doorbell circuit at the breaker if your installation requires that step.
- Wait briefly for the doorbell to lose power.
- Remove the faceplate if needed to reach the reset button.
- Press and hold the reset button.
- Keep holding until you see a light change, a restart pause, or another reset signal from the device.
- Restore power and let the doorbell finish starting up.
If your wired model uses a different Ring setup path after a reset, follow that model’s current support instructions rather than assuming it behaves like a battery doorbell. Wired models can be more sensitive to power conditions, so a true power interruption is often the difference between a reset that works and one that seems to do nothing.
How to tell the reset worked
A reset worked when the doorbell shows a clear change in state, not just because you held the button. Look for a visible LED light change, a restart pause, or the device becoming available for setup again in the app.
If it was a factory reset, the app should no longer treat it like an already linked device. You may see it appear ready to add again, or you may need to start setup from scratch in the app. If nothing changes at all, the button press probably didn’t register.
The cleanest sign is this: the doorbell behaves like a device that still has power, but no longer has its old setup attached. If it still shows up in the app exactly as before, the reset likely did not complete.
If the reset button does nothing
When the reset button does nothing, the usual causes are dead power, the wrong button, or a model-specific reset method you haven’t used yet. The first thing to check is whether the doorbell actually has power, especially on wired models or on battery models with a drained pack.
If power is present, remove the faceplate again and confirm you found the real reset button, not a mounting latch or a security screw. If you’re still stuck, stop and check the exact model’s current Ring support instructions. Some models use slightly different reset behavior, and forcing the wrong sequence won’t help.
If the device is completely unresponsive, the issue may be power rather than reset. In that case, fix the power source first and try again only after the doorbell is back online enough to react.
Do you need to remove it from the Ring app?
For a factory reset, yes, you should expect to remove the device from the app or start the removal process as part of making it ready for a fresh setup. For a soft restart or power cycle, you usually do not remove anything.
The exact app path can change, so check the current support instructions before deleting a device from your account. Removing it at the wrong time can make setup more confusing, not less, because the app may still expect the old pairing state while the doorbell has already been cleared.
If you’re not sure whether your model needs the app removal step before or after the reset, follow the current model-specific Ring instructions instead of guessing. That’s the safest place to confirm the order.
Set it up again and test it
After the reset, reconnect the doorbell in the app, reinstall it on the mount if you removed it, and run a quick test. You want to confirm live video, motion alerts, and a button press notification if your model supports them.
Start by adding the doorbell back to your account if the reset cleared its setup. Then check that live view opens, motion is detected, and the bell press shows up where you expect it in the app. If video works but notifications do not, the reset probably succeeded and the remaining issue is setup, permissions, or alert settings rather than the hardware reset itself.
If the device was removed from the wall for access, remount it before the final test so the angle and motion detection reflect normal use. A doorbell can look fine on the bench and still miss motion once it’s back outside.
Frequently Asked Questions
How do I know if my Ring Doorbell needs a factory reset instead of a restart?
A factory reset is the right move when you need the doorbell treated like a new device, or when you’re re-pairing it after setup problems. If it only froze or glitched briefly, a restart or power cycle is usually the better first step.
Where is the reset button on a Ring Doorbell?
It depends on the model, but it’s usually under the faceplate, inside the battery area, or on the back of the unit. Check the exact model before you press anything, because the wrong spot can feel like a button but do nothing.
How long should I hold the reset button?
The right hold time depends on the model, and the current support instructions are the safest source for that detail. In practice, you hold it until the doorbell clearly restarts or shows a reset light change, not just for an arbitrary count.
Should I remove my Ring Doorbell from the app before resetting it?
Only if you’re doing a factory reset and the current instructions for your model say to remove it. For a restart or power cycle, leave it in the app. Removing it too early can make setup harder if the reset doesn’t complete cleanly.